Fried Kunststofftechnik - Logo
 circular saws 
 table milling 
surface planing machine 
 shelf trolley 
 Ordering form 

Safety devices for wood-working machines.

Play safe in wood working; a sick employee is the most expensive employee. In intensive development work and close cooperation with the trade association having liability for industrial safety and insurance to minimise this effect; we have developed wood-working safety devices that are exemplary in their characteristic.

They not only serve to prevent accident but have also been conceived to boost the performance of personnel and hence to advance rationalisation in the firm.

All our plastic parts consist of homogenous, labelled plastics that are suitable for recycling.

Prices are valid as from 01.08.2008













Safety accessory for circular saws.

FRIED saw guards are for saw blades up to 250 mm Ø or 315 mm Ø

FRIED patented circular-saw guard unites the protection of hands in ideal manner with optimum sawdust extraction. It was designed both under ergonomic as well as fluid-flow perspectives.

Extraction of sawdust is boosted by reasonably exploiting the obvious saw blade's rotational flow.

An adjustable guard fastener on the rip fence directly above the cutting slot ensures easy setting to the respective ideal position.

 

 to the top
 

Extraction guard for saw blades
up to 250 mm Ø, fastened on the rip fence.

Extraction nozzle has 38 mm external diameter. Due to the special sawdust collection around the fastening point this guard is also optimally suitable for combined table and circular cross-cut saw.

Order No: 98
Euro: 13.63




 

Extraction guard for saw blades
up to 315 mm Ø, fastened on the rip fence.

Extraction nozzle has 38 mm external diameter.
Suitable for retrofitting.

Order No: 100
Euro: 23.68




 

Extraction guard for saw blades
up to 315 mm Ø, fitted on the sword.

Extraction nozzle has 38 mm external diameter.
Not adjustable.

Order No: 96
Euro: 24.26






to the top




FRIED saw guards for saw blades up to 315 mm Ø, 450 mm Ø and 500 mm Ø.

These patented saw guard with extraction and pushing rod is available in two widths. The narrow version is for vertical saw blades; the wide version for swivelled saw blades. The crystal-clear front cover allows free view of the saw blade. It is fastened on special guard carrier.

The pushing rod is made of unbreakable, splinter-free plastic and serves also as handgrip for setting the guard to the respective cutting height.

 

 to the top
 

Wide saw guard for blades up to 450 mm Ø

Width of guard with a swivelled saw blade.

Order No: 52
Euro: 72.77


Wide saw guard for blades up to 315 mm Ø

Width of guard with a swivelled saw blade.

Order No: 60
Euro: 66.76




 

Narrow saw guard for blades up to 315 mm Ø

Width of guard with a swivelled saw blade.

Order No: 59
Euro: 54.86


Narrow saw guard for blades up to 450 mm Ø

Width of guard with a swivelled saw blade.

Order No: 53
Euro: 60.06


Narrow saw guard for blades up to 500 mm Ø

Width of guard with a swivelled saw blade.

Order No: 99
Euro: 64.45




 

Guard carrier for small circular saws

is adjustable for cutting widths of 450-850 mm Ø

Order No: 39/1
Euro: 479.33


Guard carrier for format saws

is adjustable for cutting widths of 800-1250 mm Ø

Order No: 39/2
Euro: 574.04


Parallelogram suspension

(without carrier) for cutting widths from 450-850 mm Ø (without figure)

Order No: 39/11
Euro: 206.75


Parallelogram suspension

(without carrier) for cutting widths from 800-1250 mm Ø (without figure)

Order No: 39/21
Euro: 322.25




 

Fastening rail long

for No. 52+53

Order No: 55/1
Euro: 8.55


Fastening rail short

für Nr. 59+60

Order No: 55/11
Euro: 8.55

 

Extraction nozzle

for hose diameter 80mm (internal)

Order No: 55/2
Euro: 26.57

 

Inlet roller

for saw guard No. 59+60

Order No: 101/1
Euro: 12.13


Inlet roller

for saw guard No. 52+53

Order No: 101/2
Euro: 12.13




 

Spare front protection cover

for No. 52+53

Order No: 55/3
Euro: 27.14


Spare front protection cover

for No. 59+60

Order No: 55/31
Euro: 27.14


Pushing rod

Order No: 54
Euro: 7.16






to the top












Safety accessory for table mills.

FRIED chip extraction chute and milling guard for milling curved parts.

This device was developed in order to especially facilitate all possible working processes when milling curved parts with optimum chip extraction.

 

 to the top
 

Tool cover I for tools up to 140 mm Ø

Basic version: with feed strip, small curve-milling limit stop and chip guide element for milling ball-bearing rings with extraction nozzle 120 mm (outside)

Order No: 95
Euro: 213.68




 

Tool cover I for tools up to 200 mm Ø

Consisting of upper cover and front vision glass (large)

Order No: 95/11
Euro: 67.57




 

Positioning device for spindle 30 mm

For accurately adjusting the unit when milling with a starting ring

Order No: 95/1
Euro: 48.51


for spindle 40 mm

Order No: 95/2
Euro: 48.51




 

Starting ring

In the protected clamping system, fixed partial starting rings or other curve-milling limit stops can be inserted at every desired height.


 

Starting ring 80 mm Ø

Order No: 95/3
Euro: 47.36


Starting ring 100 mm Ø

Order No: 95/4
Euro: 47.36


Starting ring 125 mm Ø

Order No: 95/5
Euro: 50.82





 

Curve-milling limit stop small

Order No: 95/7
Euro: 57.75


Curve-milling limit stop large

Order No: 95/8
Euro: 57.75


Fastening angle for flow guide element

Order No: 95/10
Euro: 41.58





 

Chip guide element

The re-adjustable chip guide element can be used on both sides and can be obtained as a spare part.

Order No: 95/12
Euro: 33.50


Vision glass stop small

(without figure)

Order No: 95/13
Euro: 24.83


Vision glass stop large

(without figure)

Order No: 95/14
Euro: 24.83





 

Dial gauge

High-precision dial gauge for setting the exact milling depth or height.

Order No: 14
Euro: 299.15






to the top












Safety accessory for surface planing machines.

FRIED contact-members vibration guard for retrofit.

FRIED press-on guard replaces the previously prescribed protection devices on planing machines - jointing ledger (Order No. 38) and front bridge guard, clapper guard (Order No. 32).

The protective device offers the advantage that the workpiece to be machined is automatically pressed on the limit stop without adjustment.

The rolling member is extremely user-friendly and has no protruding joints.

It is possible to fix it on all machines.

 

 to the top
 

Contact folding-members guard

for 400 mm planing width, with press-on mechanism.

Order No: 56
Euro: 270.27


Contact folding-members guard

for 500 mm planing width, with press-on mechanism.

Order No: 57
Euro: 276.05


Spare contact piece

for 400 mm planing width

Order No: 58/1
Euro: 68.72


Spare contact piece

for 500 mm planing width

Order No: 58/2
Euro: 79.12


Spare members carpet

for 400 mm planing width

Order No: 58/4
Euro: 59.48


Spare members carpet

for 500 mm planing width

Order No: 58/5
Euro: 61.45





 

Clapper guard cover

FRIED clapper guard for planing shaft. The covering width of a member is 58 mm including the hinge. The same number of members is needed in front and behind the limit stop.
Suitable for retrofitting machines.


Clapper guard cover in front of limit stop

Order No: 32
Euro: 7.51  (per member)


Clapper guard cover behind the limit stop

Order No: 32/1
Euro: 8.32  (per member)


Retrofitting costs for rear clapper guard

Order No: 32/1R
Euro: 33.00





 

Setting gauge for planing knives from 80 up to 145 mm Ø

The setting gauge for planing knives is equipped with permanent magnets. This dispenses with the need to press down the device whilst setting. The hands are free for setting and tightening the knives.

Order No: 47
Euro: 150.15




 

Auxiliary limit stop can be swivelled

The auxiliary limit stop is indispensable for safe planing of narrow workpieces. When it is not needed, it is easily swivelled up and snaps in place.
Material: aluminium
Suitable for machine limit stop from 900 bis 1,300 mm.

Order No: 46
Euro: 137.45






to the top












Shelf Trolley - multifunction and highly flexible.


  • Easy one-person handling
  • Modular design
  • Stable trolley made of square steel tube
  • 2 Fixed rollers, 2 caster wheels (optionally explosion protected)
  • Robust round cross bars with snap-in system
  • Traverses with interlocking
  • Heavy-duty cross bars
  • 13 Compartments per side, possible
  • High stability against toppling, even with one-sided load
  • Resilient overlay mats
  • Optional equipment for power & free systems

FRIED Shelf Trolley
Patent matter
Assured snap-in of cross bars
Spacing as desired
Cross bars can be exchanged at ease
FRIED Regalwagen Highly variable
For bulky parts this system is very variable
FRIED Regalwagen Room wonder
The terraced arrangement of traverses offers more usable space

 

 

 

 to the top
 

shelf trolley type FRW

Standard version:

  • trolley with 2 caster wheels, 2 fixed rollers
  • 2 Round cross bars for hanging in the traverses
  • 10 Pairs of traverses
  • 50 Pieces of cross bars
  • Load-bearing capacity per storage space: 80 kg
  • Total load: 800 kg
  • Empty weight: 50 kg

Order No: FRW 2000
Euro: 500.00





Accessories



 

Complete equipment for 5 floors:

20 Traverses / 50 cross bars in packet (without figure)

Order No: FRW 2205
Euro: 195.00





 

1 Pairs of traverses

Order No: FRW 2140
Euro: 15.00





 

10 Pieces of cross bars

Order No: FRW 1039
Euro: 25.00





 

5 Pieces overlay mats

W x H: 1600 x 980 mm

Order No: FRW 1101
Euro: 33.00





 

20 Pieces clips

For securing the overlay mats

Order No: FRW 1201
Euro: 15.00







to the top